RRD Digital Solution Center
RRD Digital Solution Center
Printable PDF Version
RRD Digital Solution Center

Mac Quark 7

Configure Layout Application:
Building the document

NOTE:Click on any image for larger view

Page files must be set up to the trim size of the publication.

The example shown is for a publication with a final trim size of 8.125" X 10.875"

All images and elements that bleed should be extended at least 1/8" (.125").

All colors that are used in the document that are NOT running as spot colors on press must be set to CMYK by changing the Color Mode to CMYK.

All colors that are used in the document that ARE running as spot colors on press must be setup as Color Mode to Spot Color.

All colors that are not used in the document should be deleted from the color palette.

Mac Quark 7

Setting up a Print Style:

A Quark Print Style is a capture of all of the settings you would normally enter manually in the Print Dialog menu. By taking the time now to set up a Print Style it will allow you to quickly produce consistent output every time.

To set this up you will next download a Print Style template and customize it to your own specifications.

Note: Before setting up a print preset be sure to install the Prinergy Refiner ppd file. See the Getting Started

NOTE: Click on any image for larger view

Step 1

Download one of the following Print Style Templates.
NOTE: only download the Ad Management Template if the DSC is swapping high res ad files for placement files in your document. Contact your TSA if you have any questions

Step 2

After you have downloaded the Print Style:

  • Launch Quark 7
  • Select Edit > Output Styles
Step 3

In the Output Styles Menu:

  • Click Import
Step 4
  • Locate the Output Style Template that was downloaded
  • Click Open
Step 5

In the Output Styles window

  • Highlight the Output Style you imported
  • Click Edit
Step 6
  • Rename the Print Style. In this example we named it RRD followed by the trim size.
  • Set Paper Size to Custom and the Width and Height to 1" larger than the final trim size of your title. For a title that is 8.125" x 10.875" set the Width to 9.125" and the Height to 11.875".
  • Click OK
Step 7
  • Click Save
Mac Quark 7 - Writing a PostScript file:
Step 1
  • Choose the Print Style you configured from the drop down menu at the top. It will load the predefined settings
  • In the Pages form enter in the page number that you wish to make into a PDF. NOTE: Create SINGLE page PDF's for submitting to the DSC.
  • You should verify the settings in each tab to make sure the settings match the settings you set up in the Print Style.
  • Make sure the desired layers are turned on.

  • Click Printer in the bottom left of the window.
Step 2
  • Under the PDF drop down menu choose Save PDF as Postscript...
Step 3
  • Name the PostScript file using the convention of 3 digits for the folio number, an underscore, and an abbreviation for the job title, followed by .ps. Example: page 1 of job number 9512345 is named 001_9512345.ps.
  • Cover page folios can be named FC, IFC, IBC and BC for Front Cover, Inside Front Cover, Inside Back Cover and back Cover respectively. Example: The front cover of job number 9512345 would be named fc_9512345.ps (See the File Naming Guidelines document for more detailed info)
Step 4
  • If you are using a Distiller Watched folder, select the In folder as the destination for the saved postscript file
  • Select Save.
Step 5
  • Click Print.
  • Distiller will automatically process your postscript file and produce a PDF with RRD settings. Note: Make sure Distiller is running
  • Open your PDF and preview to ensure that is accurate before uploading it to InSite.
Untitled Document
 
Untitled Document RRD Digital Solution Center